Multi-Tech Systems MVP-2400, MVP-2410 manual 711 a/u, 726, @, 727, @, 723.1 @, 729, Net Coder, 141

MultiVOIP User Guide		Technical Configuration (Digital Voips)
	Voice/Fax Parameter Definitions (cont’d)
	Coder Parameters
	Coder	Manual or	Determines whether selection of coder
		Auto-matic	is manual or automatic. When
			Automatic is selected, the local and
			remote voice channels will negotiate
			the voice coder to be used by selecting
			the highest bandwidth coder supported
			by both sides without exceeding the
			Max Bandwidth setting. G.723, G.729,
			or G.711 are negotiated.
	Selected	G.711 a/u	Select from a range of coders with
	Coder	law 64	specific bandwidths. The higher the bps
		kbps;	rate, the more bandwidth is used. The
		G.726, @	channel that you are calling must have
		16/24/32/4	the same voice coder selected.
		0 kbps;
		G.727, @	Default = G.723.1 @ 6.3 kbps, as
		nine bps	required for H.323. Here 64K of digital
		rates;	voice are compressed to 6.3K, allowing
		G.723.1 @	several simultaneous conversations
		5.3 kbps,	over the same bandwidth that would
		6.3 kbps;	otherwise carry only one.
		G.729,	To make selections from the Selected
		8kbps;
		Net Coder	Coder drop-down list, the Manual
		@	option must be enabled.
		6.4, 7.2, 8,
		8.8, 9.6
		kbps
	Max	11 – 128	This drop-down list enables you to
	bandwidth	kbps	select the maximum bandwidth allowed
	(coder)		for this channel. The Max Bandwidth
			drop-down list is enabled only if the
			Coder is set to Automatic.
			If coder selected automatically, then
			enter a value for maximum bandwidth,
			as directed by VOIP administrator.

141