Multi-Tech Systems MVP-2410, MVP-2400, MVP-3010 manual 553

MultiVOIP User Guide		Call States/Reasons
		Call Reasons Listing (cont’d)
No	State	Description
16	No Change. Service	The reason for address resolution. The
	Prohibited	required service is not allowed for the
		endpoint.
17	Zone Prefix	The reason for address resolution after the
	Removed	zone prefix was removed.
18	Exit Zone Prefix	The reason for address resolution after the
	Removed	exit zone prefix was removed.
19	Ip Address Set	The reason for address resolution after the
		IP address was found from the aliases.
20	Address Forwarded	The reason for address resolution after
		finding that the call should be forwarded.
21	Address Found	The reason for state
		AddressResolutionDone.
22	Need to Send LRQ	The reason for state
		AddressResolutionDone.
23	Failure in App. Event	The call cannot be completed because of a
	Handler	failure in the application event handler. (For
		example, the return value < 0.)
24	Internal Failure	The call cannot be completed because of an
		internal error.
25	Service Not Allowed	The call cannot be completed because a
		required service is not allowed.
26	Exit Zone Not	The call cannot be completed because it was
	Allowed	dialed without an exit zone prefix, or the
		exiting zone is not allowed for call.
27	No Destination in	The call cannot be completed because it was
	Call	dialed without a destination.
28	Cannot Send LRQ	The call cannot be completed because an
		LRQ cannot be sent.
29	Address Not Found	The call cannot be completed because an
	after LRQ	LCF was not accepted for the LRQ.
30	Call Not Register	The reason for sending a DRJ.
31	Origin Connected	The reason for a Connect message that
	First	arrives without first asking the application.
		This happens when the origin is already
		connected when the destination connects,
		which is an error.
32	DCF to Origin	A DCF was sent to the origin.
33	DCF to Dest	A DCF was sent to the destination.
34	App. Disconnected	An application initiated disconnect of the
	Destination	destination (associated with the Call Cannot
		Complete state or with GK Disconnect Call
		state.)

553