Multi-Tech Systems MVP-2400, MVP-2410, MVP-3010 manual 408

Operation & Maintenance MultiVOIP User Guide

MultiVOIP Program Menu (cont’d)

Menu Selection	Description
Download Factory Defaults	Select this to return the configuration
	parameters to the original factory values.
Download Firmware	Select this to download new versions of
	firmware as enhancements become
	available.
Download User Defaults	To be used after a full set of parameter
	values, values specified by the user, have
	been saved (using Save Setup). This
	command loads the saved user defaults
	into the MultiVOIP.
Set Password	Select this to create a password for access
	to the MultiVOIP software programs
	(Program group commands, Windows
	GUI, web browser GUI, & FTP server).
	Only the FTP Server function requires a
	password for access. The FTP Server
	function also requires that a username be
	established along with the password.
Uninstall	Select this to uninstall the MultiVOIP
	software (most, but not all components are
	removed from computer when this
	command is invoked).
Upgrade Software	Loads firmware (including H.323 stack)
	and factory default settings from the
	controller PC to the MultiVOIP unit.

“Downloading” here refers to transferring program files from the PC to the nonvolatile “flash” memory of the MultiVOIP. Such transfers are made via the PC’s serial port. This can be understood as a “download” from the perspective of the MultiVOIP unit.

When new versions of the MultiVoip software become available, they will be posted on MultiTech’s web or FTP sites. Although transferring updated program files from the MultiTech web/FTP site to the user’s PC can generally be considered a download (from the perspective of the PC), this type of download cannot be initiated from the MultiVoip software’s Program menu command set.

Generally, updated firmware must be downloaded from the MultiTech web/FTP site to the PC before it can be loaded from the PC to the MultiVOIP.

408