Introduction
Installation
How to Use
Configuration Definitions (Cont.)
Camera control
This section explains how to control the Network Camera's digital zoom and optional pan/tilt unit or scanner using RS485 interface.
RS485 Settings
Disable: Select this option to disable this function.
PTZ camera: Select this option to enable PTZ operation.
To use this feature, first connect the Network Camera with a PTZ Unit or scanner via RS485 interface. Then configure the PTZ driver and RS485 port settings in the following diagram.
Definitions | Configuration |
Appendix
Toshiba offers Pelco D protocol and others. If none of the above PTZ drivers is supported by your PTZ scanner, select Custom camera (scanner). Refer to the user's manual of your PTZ scanner to set the Camera ID, PTZ driver, and Port settings. The Camera ID is necessary for multiple cameras control. If you select PTZ camera and click Save to enable this function, the camera control panel will be displayed in the main page as the following diagram:
㪎㪐㩷㪆㩷㪈㪍㪇
54
