Toshiba IK-WB70A manual 㪏㪏㩷㪆㩷㪈㪍㪇

■System boot

Select this option to allow the Network Camera to trigger when the power of Network Camera is disconnected.

Event Schedule: The effective period in which the event stays active. Specify the effective period for the event.

■Select the days on weekly basis.

■Select the time for recording in 24-hour time format.

Action: Also referred as the effect, defines the action to be performed by the Network Camera when the trigger is activated. Select the action to perform when a trigger is activated.

■Trigger digital output for [#] seconds

Select this option to turn on external digital output device when a trigger is activated. Specify the length of trigger interval in the text box.

■Server name and Media name

Select the server and media name to allow the Network Camera to send the media files to the server when a trigger is activated. The server name is a name specified on the server setting page.

The media name is a name specified on the media setting page and listed in the drop-down list.

When completed, select Enable this event. Click Save to take effect and then click Close to quit this page. The new event name will appear in the event drop-down list on the application page. To remove an event setting from the list, select an event name from the drop-down list and then click Delete.

㪏㪏㩷㪆㩷㪈㪍㪇

Introduction

Installation

How to Use

Definitions Configuration

Appendix

63