Physical description, Front panel, Connectors | Toshiba IK-WB70A

Introduction

Installation

How to Use

Physical description

Front panel

Illuminance sensor

Lens

IR LED

Connectors

General I/O terminal block

Ethernet 10/100 RJ45 plug

Audio output (green) mini-jack

Microphone input (pink) mini-jack

Power cord socket (black)

GND

Cable length: approx. 39 inches (1000 mm)

General I/O Terminal Block

This Network Camera provides a general I/O terminal block which is used to connect external input or output devices. The pin deﬁnitions are described below.

Deﬁnitions

Conﬁguration

N.C.

485B

485A AC24V AC24V

GND DI DO +12V

N.C.: No Connector

485B: RS485-

485A: RS485+

AC24V: 24 VAC Power Input

AC24V: 24 VAC Power Input

GND:	Ground
DI :	Digital Input
DO :	Digital Output
+12V :	12 VDC Output

Appendix

Pin	Name	Speciﬁcation
N.C.	No Connector
485B	RS485-	3.3 V
485A	RS485+	3.3 V
AC24V	24 VAC Power Input	24 VAC ± 10 %
AC24V	24 VAC Power Input	24 VAC ± 10 %
GND	Ground
DI	Digital Iutput	OPEN/Short-to-GND, isolation 2 kV
DO	Digital Output	Max. 12 VDC, max. 400 mA, isolation 2 kV
+12V	12 VDC Output	12 VDC ± 10 %, max. 0.4A

㪊㪎㩷㪆㩷㪈㪍㪇

12

Image 12

Toshiba IK-WB70A manual Physical description, Front panel, Connectors, General I/O Terminal Block

Contents

Model IK-WB70A Introduction FCC USA-INFORMATION Terms and Trademarks Important Safeguards 㪊㪇㩷㪆㩷㪈㪍㪇㪊㪈㩷㪆㩷㪈㪍㪇 Precautions for Use DisclaimerCopyright and Right of Portrait Protection of Personal Information AC adapter Speciﬁcations AC adapter DSA-20P-10 Table of Contents Contents Connectors Physical descriptionFront panel General I/O Terminal Block Internal Circuit Signal Condition Digital InputDigital Output Installation Hardware installation Setup the Network Camera over the Internet Network deploymentInternet connection via a gateway Internet connection with static IP Internet connection via PPPoE Point-to-Point over Ethernet Set up the Network Camera through Power over Ethernet PoE When using a PoE hubWhen using a non-PoE hub Software installation Initial Access to the Network Camera Using web browsers 㪋㪌㩷㪆㩷㪈㪍㪇 Using 3GPP-compatible mobile devices MPEG-4 Main Screen with Camera View Toshiba LogoMenu Camera Name Live Video Window 㪋㪐㩷㪆㩷㪈㪍㪇㪌㪇㩷㪆㩷㪈㪍㪇 Client Settings Stream OptionsMPEG-4 Media Options MPEG-4 Protocol Options MP4 Saving Options Conﬁguration Deﬁnitions System ParametersSystem System Time DI and do Security Settings Root PasswordAdd User Manage User Enable Https Https Create and Install Certiﬁcate To install a trusted create certiﬁcateTo create a self-signed certiﬁcate automatically To create a self-signed certiﬁcate manually Certiﬁcate Information Security Alert Network Network Type PPPoE Point-to-point over Ethernet 㪍㪉㩷㪆㩷㪈㪍㪇 Http Https Two way audio FTP Rtsp Streaming 㪍㪎㩷㪆㩷㪈㪍㪇 Ddns Dynamic domain name service Ddns Access list Allowed list or Denied listDelete allowed list / Delete denied list Video settings Audio and video Image Settings AutoKeep current value Sensor Settings Privacy mask Enable WDR Wide Dynamic Range IR cut ﬁlter 㪎㪋㩷㪆㩷㪈㪍㪇 Disable IR LED Audio settings Motion detection 㪎㪏㩷㪆㩷㪈㪍㪇 RS485 Settings Camera control Preset Position Custom Command 㪏㪈㩷㪆㩷㪈㪍㪇 Media Settings Application 㪏㪊㩷㪆㩷㪈㪍㪇 Server Settings 㪏㪌㩷㪆㩷㪈㪍㪇㪏㪍㩷㪆㩷㪈㪍㪇 Event 㪏㪏㩷㪆㩷㪈㪍㪇 Recording Settings Recording 㪐㪇㩷㪆㩷㪈㪍㪇 System log View parametersRemote Log Current Log Maintenance RebootRestore Upload or Export Daylight Saving Time Conﬁguration File Upgrade Firmware 㪐㪌㩷㪆㩷㪈㪍㪇 Troubleshooting Reboot and restoreStatus LED Audio Wrong date and time Glossary Index Daylight Saving Time DST Use Deﬁnitions Conﬁguration Speciﬁcations AWB Appearance Diagram 㪈㪇㪉㩷㪆㩷㪈㪍㪇 Technology License Notice MPEG-4 AAC TechnologyMPEG-4 Visual Technology AMR-NB Standard GNU General Public License 㪈㪇㪌㩷㪆㩷㪈㪍㪇 No Warranty END of Terms and Conditions Toshiba America Information SYSTEMS, INC