Introduction
Installation
How to Use
Definitions | Configuration |
Appendix
Configuration Definitions (Cont.)
Server name: Enter a descriptive name for the server setting.
Server Type: There are four choices of server types available: Email, FTP, HTTP, and Network storage.
Email: Select to send the media via Email when a trigger is activated.
■Sender email address: Enter the email address of the sender.
■Recipient email address: Enter the email address of the recipient.
■Server address: Enter the domain name or IP address of the email server.
■User name: Enter the user name of the email account.
■Password: Enter the password of the email account.
To verify if the email settings are correctly configured, click Test. The result will be shown in a
FTP: Select to send the media to an FTP server when a trigger is activated.
■Server address: Enter the domain name or IP address of the FTP server.
■Server port
By default, the FTP port server is set to 21. Also, it can be assigned with another port number between 1025 and 65535.
■User name: Enter the login name of the FTP account.
■Password: Enter the password of the FTP account.
■Remote folder name
Enter a folder to place the media file. If the folder name does not exist, the Network Camera will create one on the FTP server.
■Passive Mode
Most firewalls do not accept new connections initiated from external requests. If the FTP server supports passive mode, select this option to enable passive mode FTP and allow data transmission to pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will be shown in a
㪏㪌㩷㪆㩷㪈㪍㪇
60
