Application
This section explains how to configure the Network Camera to react in response to particular situations. A typical application is that when a motion is detected, the Network Camera sends buffered images to an FTP server or via Email as notifications.
Introduction
In the illustation on the right side, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, you can specify what kind of action will be performed. You can configure the Network Camera to send snapshots or videos to your email address or FTP site.
Event Trigger | Action |
ex. Motion detection, Periodically, Digital input, System reboot
Media | Server |
(what to send) | (where to send) |
ex. Snapshot, Video Clips | ex. Email, FTP |
Installation
How to
To start plotting an event, it is suggested to configure server and media segments first so that the Network Camera will know what action to perform when a trigger is activated.
Media Settings
In Media Settings column, click Add to open the media setting page. In this page, you can specify what kind of media to send when a trigger is activated. A total of five media settings can be configured.
Use
Definitions | Configuration |
Appendix
㪏㪉㩷㪆㩷㪈㪍㪇
57
