Audio settings

Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that if mute mode is turned on, no audio data will be transmitted to all clients even though the audio transmission is enabled in the Client Settings page. In that case, the following message is displayed.

Input gain: The input gain are selectable at the folowing settings:

-34.5 dB, -33 dB, -31.5 dB, -30 dB, -28.5 dB, -27 dB, -25.5 dB, -24 dB, -22.5 dB, -21 dB, -19.5 dB, -18 dB, -16.5 dB, -15 dB, -13.5 dB, -12 dB, -10.5 dB, -9 dB, -7.5 dB, -6 dB, -4.5 dB, -3 dB, -1.5 dB, 0 dB, +1.5 dB, +3 dB, +4.5 dB, +6 dB, +7.5 dB, +9 dB, +10.5 dB, +12 dB.

Audio type : Select audio codec AAC or GSM-AMR and the bit rate

AAC targets at performing good sound quality at the cost of higher bandwidth consumption. The bit rates are selectable at the following rates: 16Kbps, 32Kbps, 48Kbps, 64Kbps, 96Kbps and128Kbps

GSM-ARM is designed to optimize speech quality and requires less bandwidth. The bit rates are selectable at the following rates: 4.75Kbps, 5.15Kbps, 5.90Kbps, 6.7Kbps, 7.4Kbps, 7.95Kbps, 10.2Kbps and 12.2Kbps.

When completed with the settings on this page, click Save to take effect.

Introduction

Installation

How to Use

Definitions

Configuration

Appendix

㪎㪍㩷㪆㩷㪈㪍㪇

51

Page 51
Image 51
Toshiba IK-WB70A manual Audio settings