3.In the Upload Column, click Browse... and specify the XML file.
If the incorrect date and time is assigned, you will see the following warning message when uploading the file to the Network Camera.
Introduction
4.Click Upload. To enable the DST, see System Time on page 28.
The following message is displayed when attempting to upload an incorrect file format.
Upgrade Firmware
This feature allows you to upgrade the firmware on your Network Camera. It takes about five minutes to complete the process.
Do not power off the Network Camera during the upgrade.
Follow the steps below to upgrade firmware:
1.Download a new firmware file from Toshiba website. The file is in pkg file format.
2.Click Browse... and specify the firmware file.
3.Click Upgrade. The Network Camera starts to upgrade and will reboot automatically when the upgrade completes.
㪐㪋㩷㪆㩷㪈㪍㪇
Installation
How to Use
Definitions | Configuration |
Appendix
69
