Toshiba IK-WB70A manual Access list, Allowed list or Denied list

Introduction

Installation

How to Use

Definitions Configuration

Configuration Definitions (Cont.)

Access list

This section explains how to control the access permission by checking the client PC's IP addresses. It contains of the following four segments: Allowed list, Denied list, Delete allowed list, and Delete denied list.

Allowed list or Denied list

There are two lists for permission control: Allowed list and Denied list. Only those clients whose IP addresses are in the Allowed list and not in the Denied list can access the Network Camera.

1.In the Allowed list or Denied list column, type the starting IP address and ending IP address in the text boxes. A total of ten lists can be configured for both columns.

2.Click Add to take effect.

NOTE

●For example, when the range of the allowed list is set from 1.1.1.0 to 192. 255. 255. 255 and the range of the denied list is set from 1.1.1.0 to 170. 255. 255. 255, Only users' IP located between 171.0.0.0 and 192. 255. 255. 255 can access the Network Camera.

Appendix

Allowed Denied

List List

Delete allowed list / Delete denied list

1.In the Delete allowed list or Delete denied list, select a list from the drop-down list.

2.Click Delete to take effect.

㪍㪐㩷㪆㩷㪈㪍㪇

44