62 Adding Parts
www.dell.com | support.dell.com
Removing an AGP Card1
Press the card lever toward the PCI connector.
2
Pull the card up and out of the card clip.
Installing an AGP Card1
To add or replace the card, press the card lever toward the PCI connector and gently press the
card into the AGP connector until it clicks into place.
2
Release the card lever, ensuring that the tab fits into the notch on the front end of the card.
3
Secure the card with the securing screw.
tab
card clip
lever
notch
PCI connector
AGP connector back of computer
card clip
lever
AGP card
card clip
slot connector