Dell MTC2, G7279, DMC manual Printer Problems

Models: DMC G7279 MTC2

1 110
Download 110 pages 13.47 Kb
Page 33
Image 33

IF THE POWER LIGHT IS STEADY AMBER The computer is receiving electrical power, but an internal power problem might exist.

Ensure that the microprocessor power cable is securely connected to the system board.

Remove and then reinstall the memory modules.

Remove and then reinstall any cards.

If the problem persists, contact Dell (see page 90).

IF THE POWER LIGHT IS BLINKING AMBER A device might be malfunctioning or incorrectly installed.

Ensure that the main power cable is securely connected to the system board.

If the problem persists, contact Dell (see page 90).

ELIMINATE INTERFERENCE Electrical appliances on the same circuit or operating near the computer can cause interference. Other causes of interference are:

Power extension cables

Keyboard and mouse extension cables

Too many devices on a power strip

Multiple power strips connected to the same electrical outlet

Printer Problems

NOTE: If you need technical assistance for your printer, call the printer’s manufacturer. See the printer documentation for the correct phone number.

CHECK THE PRINTER DOCUMENTATION See the printer documentation for setup and troubleshooting information.

ENSURE THAT THE PRINTER IS TURNED ON See the printer documentation for power button information.

VERIFY THE PRINTER CABLE CONNECTIONS

See the printer documentation for cable connection information.

Ensure that the printer cables are securely connected to the printer and the computer (see page 11).

TEST THE ELECTRICAL OUTLET Ensure that the electrical outlet is working by testing it with another device, such as a lamp.

Solving Problems

33

Page 33
Image 33
Dell MTC2, G7279, DMC manual Printer Problems