w w w . d e l l . c o m s u p p o r t . d e l l . c o m

11Replace the computer cover (see page 78).

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

12Connect your computer and devices to electrical outlets, and then turn them on.

13Click the Start button, right-click My Computer, and then click Properties.

14Click the General tab.

15To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

Replacing the Computer Cover

1Ensure that all cables are connected, and fold cables out of the way.

2Ensure that no tools or extra parts are left inside the computer.

3Place the cover on the computer.

4Slide the cover towards the front of the computer until it fits completely into place.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

5Connect your computer and devices to electrical outlets, and turn them on.

78

Adding Parts

Page 78
Image 78
Dell MTC2, G7279, DMC manual Replacing the Computer Cover