w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Booting to a USB Device

NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation.

To restart your computer to a USB device such as a floppy drive, memory key, or CD-RW drive:

1Connect the USB device to a USB connector..

2Shut down (see page 18) and restart the computer.

3Turn on the computer. When the DELL™ logo appears, press <F12> immediately.

If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer through the Start menu and try again.

NOTE: This procedure changes the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in system setup.

4When the boot device list appears, highlight USB Flash Device and press <Enter>. The computer restarts to the connected USB device.

Turning Off Your Computer

NOTICE: To avoid losing data, turn off your computer by performing a Microsoft® Windows® operating system shutdown, as described next, rather than by pressing the power button.

1Save and close any open files, exit any open programs, click the Start button, and then click

Turn Off Computer.

2In the Turn off computer window, click Turn off.

The computer turns off after the shutdown process finishes.

18

Setting Up and Using Your Computer

Page 18
Image 18
Dell MTC2 Booting to a USB Device, Turning Off Your Computer, Turn Off Computer Turn off computer window, click Turn off