If you want to stop on a channel during scanning, press 
.
If you want to resume scanning, press 
.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
To directly access a specific channel:
1. Press 
.
2. Enter the channel number you want using the keypad.
3. Press 
again.
RF Attenuation Feature
The UBC 245XLT comes with an RF Attenuation feature. If you’re near an unusually strong signal source, the signal may overload the scanner. The scanner may stop repeatedly on that signal and miss other transmissions.
The RF Attenuation feature works in all modes and attenuates (reduces) the incoming signal strength by about 15 dB, preventing stronger signals from overloading the scanner.
To turn RF Attenuation on:
1.Press ATT.
21