Uniden UBC 245XLT manual Try another Preset Fleet Map or Program

Page 81

If you experience difficulty while in TrunkTracker™ mode, try the following steps.

Problem		Suggestion
Scanner won’t track the trunked	1.	May not be a system which can be tracked by
system.		your scanner.
	2.	Missing the data frequency.
	3.	Change to a Type 1 Scanner setup.
		Review Fleet Map Programming on page 56.
Scanner won’t stop during Scan	1.	No IDs have been programmed.
List mode.	2.	The IDs you have stored are not active.
	2.	The IDs you have stored are not active.
Scanner will not acquire data	1.	Adjust the squelch for trunking mode.
channel.		See page 39.
	2.	Missing the frequency used for the data
		channel. Check your frequency list.
Missing replies to conversations.	1. Change to a Type 1 Scanner setup.
		Review Fleet Map Programming on page 56.
	2.	Try another Preset Fleet Map or Program
		your own Fleet Map.
	3.	Check to see that all of the systems
		frequencies have been entered.
Channel Activity Indicators are	1.	May be a private or telephone
flashing but no sound is heard.		interconnect call, which are intentionally
		blocked by your scanner.
	2.	The ID in your display is not active.
Scanner not tracking an EDACS	1.	Logical channel numbers ( frequencies)
system properly.		for the system are not programmed in the correct
		order. Check frequency resources and reprogram.
	2.	Not all frequencies for the system are
		programmed. Check frequency resources.

If you still cannot get satisfactory results while using your scanner or if you want additional information, please call or write to Uniden Australia PTY Limited.The address

and phone number are listed in the Warranty at the end of this manual.

If you have internet access, you can visit www.uniden.com.au or www.trunktracker.com or www.bearcat1.com/free.htm for additional information.

77

Image 81

Contents Page Earphone Warning PrecautionsATT Front ViewTop View and Display Contents Page Frequency Range Steps Transmission IntroductionImportant Notice Terminology What is Scanning? What is Searching?What is Trunk Tracking? Page Manual Channel Access Go directly to any channel Feature HighlightsPage Where to Obtain More Information Information on the Internet AC Adapter Earphone Included with Your ScannerInstalling the Battery Pack SetupLow Battery Indicator Charging the Battery PackBelt Clip Flexible AntennaSetting the Squelch Basic OperationTurn the Scanner On Keylock LCD Back LightAuto Light UHF CB CH4 ProgrammingEnter the frequency Enter the frequency number Then press Programmingn Tips Duplicate Frequency AlertDeleting a Stored Frequency CHANNELS1 2 3 4 5 6 7 8 9 ScanningTo directly access a specific channel RF Attenuation FeatureDelay in Scan or Search Mode Setting the Delay ModeDelay in Manual Mode Lockout in Manual ModeChannel Lockout LockoutnTips Lockout in Scanning ModeRestore All Locked-Out Channels Restore a Locked Out ChannelPriority Scan Changing the Priority Channel Setting a Search Range SearchingTurbo Search Data Skip Search Hold FeatureStoring Search Frequencies Frequency SkipPage SVC Scanning UHF CB SVC Scan Lockout To cancel the lockoutProgramming with SVC Scan Types of Trunking Systems Trunk TrackingPage UBC 245XLT Edacs TrackingProgramming Trunking Frequencies You will hear two Frequency, press twice, and start over Searching a Trunked Bank Changing the Display ModeDirect Entry ID Hold Mode Frequencyn Find ModeID Lockout Restore a Single IDRestore all IDs ID DelaynModeSearching Tips Channel Activity Indicators HoldnModeID MonitornMode Then the indicators represent multiple channels Programming ID Scan Lists Manually Scan ListsPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Deleting a Stored ID Programming Scan Lists During SearchMulti-Track Moving between Scan List MemoriesFleet Map Programming Selecting Trunking Programming ModeIf you are in Trunking Scan mode Selecting a Preset Fleet MapProgramming a Fleet Map Scanner returns to Programming Bank selecting modeProgramming a Hybrid System Page Toggling the Status Bit Connecting the scanner Remote InterfaceScanner to PC Scanner to Scanner Scanner to External ModemSmartScan Mode US Only Page Program Lock US Only Menu for SmartScan Smartscanner Tips US Only Page Start Remote Mode Remote PC Control ModeChange Transfer Speed PC Control ParameterClone Mode Page Cleaning Care and MaintenanceGeneral Use LocationBirdies RepairsnProblem Suggestion TroubleshootingTry another Preset Fleet Map or Program Above bands in 5 kHz steps SpecificationAppendix Preset Fleet MapsPreset Map E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Size Code Restrictions Page Uniden UBC245XLT One Year Limited WarrantyUBZZ01311AZ