Care and Maintenance
General Use
Turn the scanner off before disconnecting the power or replacing the batteries.
Always write down the programmed frequencies in the event of memory loss.
If memory is lost, simply reprogram each channel. The display shows 000.000 in all channels when
nthere has been a memory loss.
Always press each button firmly until you hear the entry tone for that key entry.
Location
Do not use the scanner in
Avoid placing the unit in direct sunlight or near nheating elements or vents.
If the scanner receives strong interference or electrical noise, move it or its antenna away from the source of the noise. If possible, a higher elevation, may provide better reception. Also try changing the height or angle of the antenna.
Cleaning
nDisconnect the power to the unit before cleaning.
Clean the outside of the scanner with a mild detergent. To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub
nthe LCD window.
Do not use excessive amounts of water.
74