Uniden UBC 245XLT manual Specification, Above bands in 5 kHz steps

Page 82

Specification

Channel:	300
Banks:	10 (30 channels each)
Service Bands:	5-preprogrammed search bands
Frequency	137-144 MHz	Land Mobile
Range:	144-148 MHz	2 Meter Ham
	Above bands in 5 kHz steps
	66.0-88.0 MHz	VHF Low Band
	148-174 MHz	VHF High Band
	108-137 MHz	Aircraft Band
	406-420 MHz	Land Mobile
	420-450 MHz	70 cm Ham
	450-470 MHz	UHF Band
	470-512 MHz	Land Mobile
	806-956 MHz	”800” Band
	Above bands in 12.5 kHz steps
Operating
Temperature:	-20°C to +60°C
Scan Rate:	100 channels per second (conventional mode)
Search Rate:	100 steps per second (Normal Search)
	300 steps per second (Turbo Search)
Scan Delay:	2 seconds
Audio Output:	210 mW nominal into 8W internal speaker
	34 mW nominal into 32W stereo headphone
	8 mW nominal into 64W earphone
Power	4.8 VDC 800mAh (internal battery or
Requirements:	AAD-245U AC Adapter
Antenna:	Rubber Antenna (included)
External Jacks:	External earphone, DC 12V power jack
	Remote Jack
Size:	2 1/2 in. (W) x 1 3/4 in. (D) x 6 in. (H)
Weight:	11 oz.

Features, specifications, and availability of optional accessories are all subject to change without notice.

78

Image 82

Contents Page Precautions Earphone WarningFront View ATTTop View and Display Contents Page Introduction Frequency Range Steps TransmissionImportant Notice What is Searching? Terminology What is Scanning?What is Trunk Tracking? Page Feature Highlights Manual Channel Access Go directly to any channelPage Where to Obtain More Information Information on the Internet Included with Your Scanner AC Adapter EarphoneSetup Installing the Battery PackCharging the Battery Pack Low Battery IndicatorFlexible Antenna Belt ClipBasic Operation Setting the SquelchTurn the Scanner On LCD Back Light KeylockAuto Light Programming UHF CB CH4Enter the frequency Enter the frequency number Then press Duplicate Frequency Alert Programmingn TipsDeleting a Stored Frequency Scanning CHANNELS1 2 3 4 5 6 7 8 9RF Attenuation Feature To directly access a specific channelSetting the Delay Mode Delay in Scan or Search ModeLockout in Manual Mode Delay in Manual ModeChannel Lockout Lockout in Scanning Mode LockoutnTipsRestore a Locked Out Channel Restore All Locked-Out ChannelsPriority Scan Changing the Priority Channel Searching Setting a Search RangeTurbo Search Search Hold Feature Data SkipFrequency Skip Storing Search FrequenciesPage SVC Scanning UHF CB To cancel the lockout SVC Scan LockoutProgramming with SVC Scan Trunk Tracking Types of Trunking SystemsPage Edacs Tracking UBC 245XLTProgramming Trunking Frequencies You will hear two Frequency, press twice, and start over Changing the Display Mode Searching a Trunked BankFrequencyn Find Mode Direct Entry ID Hold ModeRestore a Single ID ID LockoutID DelaynMode Restore all IDsSearching Tips HoldnMode Channel Activity IndicatorsID MonitornMode Then the indicators represent multiple channels Scan Lists Programming ID Scan Lists ManuallyPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Programming Scan Lists During Search Deleting a Stored IDMoving between Scan List Memories Multi-TrackSelecting Trunking Programming Mode Fleet Map ProgrammingSelecting a Preset Fleet Map If you are in Trunking Scan modeScanner returns to Programming Bank selecting mode Programming a Fleet MapProgramming a Hybrid System Page Toggling the Status Bit Remote Interface Connecting the scannerScanner to PC Scanner to External Modem Scanner to ScannerSmartScan Mode US Only Page Program Lock US Only Menu for SmartScan Smartscanner Tips US Only Page Remote PC Control Mode Start Remote ModePC Control Parameter Change Transfer SpeedClone Mode Page General Use Care and MaintenanceCleaning LocationRepairsn BirdiesTroubleshooting Problem SuggestionTry another Preset Fleet Map or Program Specification Above bands in 5 kHz stepsPreset Fleet Maps AppendixPreset Map E1P9 Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code Restrictions Page One Year Limited Warranty Uniden UBC245XLTUBZZ01311AZ