6.Press 
to scan the MRN band.
When an active channel is displayed, the scanner will alternate between the frequency and the Marine channel number.
7.Press 
to scan the UHF CB band.
When an active channel is displayed, the scanner will alternate between the frequency and the
UHF CB channel number.
8.To exit SVC Scan
mode, press 
.
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
UHF CB
During search of one of the preprogrammed service bands,
press 
to stop the scan on a frequency. HOLD
appears in the display. Press 
or 
to move up
or down one programmed frequency, or press 
to resume scanning.
Note: If you want to remain on a channel until a
responding transmission is received, press 
to activate the two second delay feature.
33