2. Press and hold 
for about two seconds.
You will hear two beeps when all the channels have been restored.
Priority Scan
When Priority Scan is turned on, your scanner checks the priority channel every two seconds for activity. If a signal is present on the priority channel, your scanner monitors the channel until the transmission ends, then resumes normal scanning. You can designate one channel in each bank as a Priority Channel.
To activate Priority Scan (in either the Manual or Scan Mode):
1. Press | . |
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Note: If you have |
|
|
|
|
|
|
|
|
|
|
locked out the priority | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
|
channel, this message appears when you select Priority mode.
2.Press 
again at anytime to deactivate Priority Scan.
26