If you are in Trunking Scan mode:
1.Press 
to return to conventional mode if you have been monitoring a trunking bank. TRUNK icon goes out.
2.Press and hold 
until you hear two short beeps.
You’ll hear two short beeps and BANK and TRUNK will begin to flash in the display.
3.Select the trunking bank you want to program.
Selecting a Preset Fleet Map
1.Select the Trunking Programming mode and the bank you want to change.
2. Use | or |
| to select E1. |
Then press 
.
3.Press 
.
4. Use 
or 
to choose the map you want. For example, E1P2.
Note: It is required that the trunked frequency has been programmed before selecting a preset fleet map.
57