Uniden BCT8 manual Fleet Map Size Codes

BCT8 8/13/03 5:14 PM Page 60

Fleet Map Size Codes

Size	Fleets	Subfleets	IDs	Blocks
				Used

0Reserves block for Type II IDs

1	128	4	16	1
2	16	8	64	1
3	8	8	128	1
4	1	16	512	1
5	64	4	32	1
6	32	8	32	1
7	32	4	64	1
8	16	4	128	1
9	8	4	256	1
10	4	8	256	1
11	2	16	256	1
12	1	16	1024	2
13	1	16	2048	4
14	1	16	4096	8

Size Code Restrictions

If you select SIZE CODE 12, 13, or 14, there are some restrictions as to which blocks can be used for these codes.

•SIZE CODE 12 can only be assigned to Blocks 0, 2, 4, or 6.

•SIZE CODE 13 can only be assigned to Blocks 0 and 4.

•SIZE CODE 14 can only be assigned to Block 0.

Since these SIZE CODES require multiple blocks, you will be prompted for the next available block when programming a Fleet Map. For example, if you assign Block 0 as an SIZE CODE 12, you will be prompted for Block 2, the next block available, instead of Block

1.And if you assign Block 0 as SIZE CODE 14, you would not see another prompt because all available blocks have been used.

60