Uniden UBC72XLT Searching For and Temporarily Storing Active Frequencies, Service Search

Page 30

2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.

•If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press Clr then enter the correct frequency. To enter the frequency anyway, press E to accept.

4.To program the next channel in sequence, press E/Pgm then repeat Steps 2 and 3.

Searching For and Temporarily Storing Active Frequencies

If you do not have a reference to frequencies in your area, use a search to find a transmission.

Note: When the scanner starts searching, it auto- matically turns on the delay function. To turn delay on or off, press Func + Dly.

Service Search

You can search for police, railroad, marine, aircraft, UHF CB, and AM CB transmissions without knowing the specific frequencies used in your area. The scanner is preprogrammed with all the frequencies allocated to these services. To use this feature, press Func + Svc. SRCH appears and the scanner searches starting with the police service bank. To select a different service bank, repeatedly press Func + Svc. Service mode appears on the display.

When the scanner stops on a transmission, press Hold to stop searching and listen to the transmission. Hold appears. In this mode, you can

Operation

30

Image 30

Contents UBC72XLT Scanner Precautions PrecautionsUBC72XLT Controls and Display UBC72XLT Controls and DisplayContents Contents Introduction IntroductionFrequency Range Step Mode Transmission MHz KHz Feature Highlights Feature HighlightsAbout This Manual Feature Highlights Understanding Scanning What is Scanning?What is Searching? Conventional ScanningSimplex Operation Repeater OperationWhere To Obtain More Information Information On The InternetIncluded With Your Scanner Included With Your ScannerUsing Non-Rechargeable Batteries Setting Up Your ScannerUsing Internal Batteries Setting Up Your ScannerSetting Up Your Scanner Page Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Earphone/Headphone Connecting an Extension SpeakerConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your ScannerLook At The Keypad HoldFunc + Pgm Look At The Display About Your Scanner Service Banks Understanding BanksChannel-Storage Banks Storing Known Frequencies Into Channels Turning On The Scanner Setting SquelchOperation OperationService Search Searching For and Temporarily Storing Active FrequenciesStoring Frequencies into Channels During Service Search Scanning the Stored ChannelsManually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Mode Chain SearchChain Search Hold Mode Setting the Search Range Direct Entry SearchDirect Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Locking Out Channels PriorityUsing Keylock Using the Display BacklightTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Care and Maintenance Care and MaintenanceCleaning General UseRepairs BirdiesSpecifications SpecificationsSeconds Optional Accessories Optional AccessoriesOne Year Limited Warranty One-Year Limited WarrantyUniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product