Uniden UBC72XLT owner manual Feature Highlights

Page 8

Feature Highlights

Close CallTM RF Capture Technology - you can set the scanner so it detects and provides information about nearby radio transmissions. See “Close CallTM RF Capture Technology” on Page 33 for more information.

Pager Screen - lets you set the scanner so it does not detect pager frequencies during Close Call search.

Chain Search - lets you enter personal search bands in 10 locations and search all locations in a chain of frequency bands.

Triple-Conversion Circuitry - virtually eliminates any interference from IF (intermediate frequency) images, so you hear only the selected frequency.

Channel-Storage Banks - the scanner has 10 banks. You can store up to 10 frequencies into each bank (for a total of 100 frequencies), so you can more easily identify calls.

Two-Second Scan Delay - delays scanning for about 2 seconds before moving to another channel, so you can hear more replies that are made on the same channel.

Lock-Out Function - lets you set your scanner to skip over specified channels or frequencies when scanning or searching.

Priority Channels - lets you program one channel in each bank (10 in all) and then have the scanner check that channel every 2 seconds while it scans the bank, so you do not miss transmissions on those channels.

Six Service Banks - frequencies are preset in separate police, railroad, aircraft, marine, UHF CB, and AM CB banks, to make it easy to locate specific types of calls.

Police, railroad and AM CB preset frequencies in the service bank are valid for Australia ONLY. Aircraft, Marine and UHF CB preset frequencies are valid for both Australia and New Zealand.

Feature Highlights

8

Image 8

Contents UBC72XLT Scanner Precautions PrecautionsUBC72XLT Controls and Display UBC72XLT Controls and DisplayContents Contents Introduction IntroductionFrequency Range Step Mode Transmission MHz KHz Feature Highlights Feature HighlightsAbout This Manual Feature Highlights What is Scanning? What is Searching?Understanding Scanning Conventional ScanningSimplex Operation Repeater OperationWhere To Obtain More Information Information On The InternetIncluded With Your Scanner Included With Your ScannerSetting Up Your Scanner Using Internal BatteriesUsing Non-Rechargeable Batteries Setting Up Your ScannerSetting Up Your Scanner Page Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Optional Antenna Connecting an Earphone/HeadphoneConnecting an Extension Speaker Attaching the Belt Clip About Your Scanner About Your ScannerLook At The Keypad HoldFunc + Pgm Look At The Display About Your Scanner Channel-Storage Banks Service BanksUnderstanding Banks Turning On The Scanner Setting Squelch OperationStoring Known Frequencies Into Channels OperationService Search Searching For and Temporarily Storing Active FrequenciesStoring Frequencies into Channels During Service Search Scanning the Stored ChannelsManually Selecting a Channel Close CallTM RF Capture Technology Special FeaturesSpecial Features Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Mode Chain SearchChain Search Hold Mode Setting the Search Range Direct Entry SearchDirect Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Locking Out Channels PriorityUsing Keylock Using the Display BacklightTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Care and Maintenance CleaningCare and Maintenance General UseRepairs BirdiesSpecifications SpecificationsSeconds Optional Accessories Optional AccessoriesOne Year Limited Warranty One-Year Limited WarrantyUniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product