Uniden UBC72XLT owner manual Care and Maintenance, General Use, Location, Cleaning

Page 49

Care and Maintenance

Keep the scanner dry. If it gets wet, wipe it dry immediately. Use and store the scanner only in normal temperature environments. Handle the scanner carefully: do not drop it. Keep the scanner away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.

General Use

•Turn the scanner off before disconnecting the power.

•Always write down the programmed frequencies in the event of memory loss.

•If memory is lost, simply reprogram each channel. The display shows 000.000 in all channels when there has been a memory loss.

•Always press each button firmly until you hear the entry tone for that key entry.

Location

•Do not use the scanner in high-moisture environments such as the kitchen or bathroom.

•Avoid placing the unit in direct sunlight or near heating elements or vents.

•If the scanner receives strong interference or electrical noise, move it or its antenna away from the source of the noise. If possible, a higher elevation might provide better reception.

•Also try changing the height or angle of the antenna.

Cleaning

•Disconnect the power to the unit before cleaning.

Care and Maintenance

49

Image 49

Contents UBC72XLT Scanner Precautions PrecautionsUBC72XLT Controls and Display UBC72XLT Controls and DisplayContents Contents Introduction IntroductionFrequency Range Step Mode Transmission MHz KHz Feature Highlights Feature HighlightsAbout This Manual Feature Highlights What is Searching? What is Scanning?Understanding Scanning Conventional ScanningRepeater Operation Simplex OperationInformation On The Internet Where To Obtain More InformationIncluded With Your Scanner Included With Your ScannerUsing Internal Batteries Setting Up Your ScannerUsing Non-Rechargeable Batteries Setting Up Your ScannerSetting Up Your Scanner Page Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Extension Speaker Connecting an Earphone/HeadphoneConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your ScannerHold Look At The KeypadFunc + Pgm Look At The Display About Your Scanner Understanding Banks Service BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchStoring Known Frequencies Into Channels OperationSearching For and Temporarily Storing Active Frequencies Service SearchScanning the Stored Channels Storing Frequencies into Channels During Service SearchManually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Chain Search ModeChain Search Hold Mode Direct Entry Search Setting the Search RangeDirect Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out ChannelsUsing the Display Backlight Using KeylockTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Cleaning Care and MaintenanceCare and Maintenance General UseBirdies RepairsSpecifications SpecificationsSeconds Optional Accessories Optional AccessoriesOne-Year Limited Warranty One Year Limited WarrantyUniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product