Uniden UBC72XLT owner manual About This Manual

Page 9

Key Lock - lets you lock the scanner's keys to help prevent accidental changes to the scanner's programming.

Direct Access - lets you directly access any channel.

Display Backlight - makes the scanner easy to read in low-light situations.

Flexible Antenna with BNC Connector - provides adequate reception in strong signal areas and is designed to help prevent antenna breakage.

Or, you can connect an external antenna for better reception.

Memory Backup - keeps the frequencies stored in memory for an extended time if the scanner loses power.

Two Power Options - let you power the scanner using internal batteries or external AC power using an optional AC adapter.

Key Confirmation Tones - the scanner sounds a tone when you perform an operation correctly, and an error tone if you make an error.

Battery Low Alert - warns you when battery power gets low.

About This Manual

The screen displays used in this manual are representations of what might appear when you use your scanner. Since what you see depends on the frequencies for your area and the settings you select, you might notice some differences between what is in this manual and what appears on your scanner.

Feature Highlights

9

Image 9
Contents UBC72XLT Scanner Precautions PrecautionsUBC72XLT Controls and Display UBC72XLT Controls and DisplayContents Contents Introduction IntroductionFrequency Range Step Mode Transmission MHz KHz Feature Highlights Feature HighlightsAbout This Manual Feature Highlights What is Searching? What is Scanning?Understanding Scanning Conventional ScanningRepeater Operation Simplex OperationInformation On The Internet Where To Obtain More InformationIncluded With Your Scanner Included With Your ScannerUsing Internal Batteries Setting Up Your ScannerUsing Non-Rechargeable Batteries Setting Up Your ScannerSetting Up Your Scanner Page Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Earphone/Headphone Connecting an Extension SpeakerConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your ScannerHold Look At The KeypadFunc + Pgm Look At The Display About Your Scanner Service Banks Understanding BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchStoring Known Frequencies Into Channels OperationSearching For and Temporarily Storing Active Frequencies Service SearchScanning the Stored Channels Storing Frequencies into Channels During Service SearchManually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Chain Search ModeChain Search Hold Mode Direct Entry Search Setting the Search RangeDirect Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out ChannelsUsing the Display Backlight Using KeylockTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Cleaning Care and MaintenanceCare and Maintenance General UseBirdies RepairsSpecifications SpecificationsSeconds Optional Accessories Optional AccessoriesOne-Year Limited Warranty One Year Limited WarrantyUniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product