Uniden UBC72XLT owner manual Resetting the Scanner

Page 48

Resetting the Scanner

If the scanner's display locks up or stops operating properly, you might need to reset the scanner.

Caution: This procedure clears all the information you have stored in the scanner. Before you reset the scanner, try turning it off and on to see if it begins working properly. Reset the scanner only when you are sure it is not working properly.

1.Turn off the scanner.

2.While holding down 2, 9, and Hold, turn on the scanner. It takes about 3 seconds to initialize and CLEAr appears.

Troubleshooting

48

Image 48

Contents UBC72XLT Scanner Precautions PrecautionsUBC72XLT Controls and Display UBC72XLT Controls and DisplayContents Contents Introduction IntroductionFrequency Range Step Mode Transmission MHz KHz Feature Highlights Feature HighlightsAbout This Manual Feature Highlights What is Scanning? What is Searching?Understanding Scanning Conventional ScanningSimplex Operation Repeater OperationWhere To Obtain More Information Information On The InternetIncluded With Your Scanner Included With Your ScannerSetting Up Your Scanner Using Internal BatteriesUsing Non-Rechargeable Batteries Setting Up Your ScannerSetting Up Your Scanner Page Setting Up Your Scanner Using AC Power Connecting the AntennaConnecting an Earphone/Headphone Connecting an Extension SpeakerConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your ScannerLook At The Keypad HoldFunc + Pgm Look At The Display About Your Scanner Service Banks Understanding BanksChannel-Storage Banks Turning On The Scanner Setting Squelch OperationStoring Known Frequencies Into Channels OperationService Search Searching For and Temporarily Storing Active FrequenciesStoring Frequencies into Channels During Service Search Scanning the Stored ChannelsManually Selecting a Channel Special Features Special FeaturesClose CallTM RF Capture Technology Setting the Close Call Options Special Features Using Close Call RF Capture Chain Search Mode Chain SearchChain Search Hold Mode Setting the Search Range Direct Entry SearchDirect Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Locking Out Channels PriorityUsing Keylock Using the Display BacklightTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Care and Maintenance CleaningCare and Maintenance General UseRepairs BirdiesSpecifications SpecificationsSeconds Optional Accessories Optional AccessoriesOne Year Limited Warranty One-Year Limited WarrantyUniden Australia PTY Limited Service Division Thank YOU for Buying a Uniden Product