Uniden SC230 owner manual Manually Programming Racing Systems, Editing the Car, Program SysteM

Manually Programming Racing Systems

		Program SysteM		E
	Menu
New System			E	Racing	E
Confirm?			E

The scanner creates an empty conventional system, with a

default name of System nnn R. nnn increments as you add new systems. R indicates that this is a racing system.

Refer to the appropriate section to set system-wide options:

•See “Editing the System Name” on Page 55

•See “Setting System Lockout” on Page 56

•See “Setting the System Hold Time” on Page 56

•See “Setting the Channel Delay Time” on Page 57

•See “Setting Data Skip” on Page 57

•See “Deleting Systems” on Page 58

•See “Copying Systems” on Page 58

Editing the Car

		Program SysteM		E
	Menu
Select the system			E
Edit Car		E
Select the car			E

Follow these steps to enter the car options.

1.Press 0-9to enter the car’s number, then press E.

2.Rotate the scroll control to select one of the following options. Then refer to the appropriate section to set or change a car setting.

•See “Entering/Editing a Car Number” on Page 50.

•See “Editing a Driver” on Page 50.

•See “Setting a Car’s Quick Key” on Page 51.

•See “Editing a Car’s Channel” on Page 51.

•See “Deleting a Car” on Page 51.

•See “Setting Lockout On A Car” on Page 52.

Programming Radio Systems

49