Uniden SC230 owner manual Entering/Editing a Car Number, Editing a Driver

Page 50

Entering/Editing a Car Number

Menu

Program SysteM

E

Select the system

E

Edit

Car

E

 

Select the car

E

Edit

Car No

E

 

1.Rotate the scroll control to select the first digit, then press 0-9to enter the correct digit.

2.Repeat Step 1 to enter or correct the second and third digits if necessary, Then press E or press down on the scroll control to accept the setting.

Hints:

•Each car number can be up to three digits.

•Press to delete the entire car number.

Editing a Driver

Menu

Program SysteM

E

Select the system

E

Edit

Car

E

 

Select the car

E

Edit

Driver

E

 

1.Rotate the scroll control to select the first letter.

2.Press and hold down Func then rotate the scroll control once to select the next letter.

3.Repeat Steps 1 and 2 until you have entered the driver’s name. Then press E or press down on the scroll control to accept the setting.

Hints:

•Each driver’s name can be up to 12 characters. Abbreviate as necessary to fit.

•Press twice to delete the current character.

•Press three times to clear the entire driver name.

Programming Radio Systems

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents OWNER’S Manual Precautions PrecautionsPrecautions Contents Using the Menu Programming Radio Systems Contents FCC Wants You to Know FCC Wants You to KnowScanning Legally FCC Wants You to Know Introduction IntroductionNFM UHF Feature Highlights Feature HighlightsFeature Highlights Weather Backlight and Power About This ManualHow the Scanner’s Controls Are Represented in This Manual Entering TextUnderstanding Scanning What is Scanning?What is Searching? Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz DCS Codes OctalUsing the Scanner at the Racetrack Conventional ScanningRepeater Operation Where To Get More InformationSimplex Operation Information On The Internet Included With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Setting Up Your Scanner Using Rechargeable Batteries Connecting an Optional Antenna Using AC PowerConnecting the Antenna Attaching the Belt Clip Connecting an Earphone/HeadphoneConnecting an Extension Speaker Installing the Demo Software Attaching the Wrist StrapScan/Srch Look At The KeypadHold Pri 0/Race+ 1-9, 0/Race Selects Yes/Att RclNo/ /Rev Look At The Display Using the Scroll Control Using MenuUsing Func Scanning Systems Turning On the Scanner Setting the SquelchBasic Operation Basic OperationBefore You Get To The Track When You Get To The TrackScanning Preprogrammed Races Selecting Systems to Scan Selecting Interference Eliminator CodesLocking/Unlocking Channels Selecting System Channel GroupsLocking/Unlocking Systems Quick-Storing Channels Temporarily Holding On a SystemHolding On a Channel Quickly Recalling Channels Other Settings Using the Backlight Initializing the Scanner’s MemoryXfer Information Using the PC Control Cloning OptionsConnecting Your Scanner to a Personal Computer Cloning the Scanner Menu Item Lets You See Using the MenuUsing the Menu Set up Priority Scan Programming Radio Systems Programming Radio SystemsQuickly Programming Racing Systems Programming Radio Systems Program SysteM Manually Programming Racing SystemsEditing the Car Racing Confirm?Entering/Editing a Car Number Editing a DriverDeleting a Car Setting a Car’s Quick KeyEditing a Car’s Channel Setting Lockout On a Car Programming Conventional SystemsEntering/Editing Conventional Channel Groups Entering/Editing Conventional ChannelsProgramming Radio Systems Editing the System Name System-Level SettingsProgramming/Editing Optional Settings Editing the System Quick Key Conventional Systems OnlySetting System Lockout Setting the System Hold TimeSetting the Channel Delay Time Setting Data SkipCopying Systems Group-Level SettingsDeleting Systems Entering/Editing the Group NameSetting the Group Quick Key Deleting Groups Channel-Level SettingsSetting Group Lockout Editing the Channel Name Conventional Systems OnlySetting Channel Priority Setting Channel Alert Setting CTCSS/DCSSetting Channel Modulation Setting Channel Attenuation Setting the Frequency StepSetting Channel Lockout Deleting ChannelsCopying/Pasting Channels Searching and Storing Service SearchSearching and Storing Custom Search Quick SearchCTCSS/DCS Search Editing a Custom Search Range Auto Search and Store Selecting a SystemStoring a System Using the Close Call Feature Using the Close Call FeatureSetting Close Call Options Close Call Hits Searching for Subaudible Tones Search and Close Call OptionsManaging Locked-Out Frequencies Unlocking All FrequenciesScreening Out Paging Systems Finding Repeater Output FrequenciesSetting the Maximum Auto Store Value Setting the Modulation TypeSetting the Delay Time Setting AttenuationSetting Data Skip Setting the Search Frequency Step Searching For a Weather Broadcast Using Weather Alert SameUsing Weather Alert Same Turning Weather Alert On/OffProgramming a Same Group Setting WX Alert Priority WX OperationCare and Maintenance Care and MaintenanceCleaning General UseRepairs BirdiesProblem Possible Cause Suggestion TroubleshootingTroubleshooting Troubleshooting Specifications SpecificationsOperating Temperature Optional Accessories Optional AccessoriesPlanning PlanningCollecting Information Planning Car #/Driver-Frequency-Priority-CTCSS/DCS Filling Out The Racing System WorksheetRace Name Racing System Worksheet Racing System W orksheetGroup Name and Quick Key Filling Out The Conventional System WorksheetSystem Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System Worksheet Conventional System WorksheetPreprogrammed Systems Preprogrammed SystemsCorporation Uniden One-Year Limited WarrantyOne-Year Limited Warranty One-Year Limited Warranty Register Online Today
Top Page Image Contents