Preprogrammed Systems
Your scanner is preprogrammed with frequencies used at races within the NASCAR Nextel, Busch, Craftsman, Indy, ARCA, and Champ racing series. One racing system and one conventional system are preprogrammed for each race.
By default, all of the preprogrammed conventional systems and one of the racing systems are unlocked, and your scanner begins to scan them when you turn it on. To speed up scanning, you can lock out systems that are beyond your reception area (typically no more than a few miles using the supplied stub antenna).
Follow these steps to lock out systems:.
1. Press and hold
Func
.
2.While continuing to hold Func , rotate the scroll control to select a system you want to lock out.
3.While continuing to hold the system.
Func
, press L/O to lock out
4.Repeat Steps 2, 3, and 4 to lock out additional systems.
The preprogrammed systems provide a starting point; you will want to find out more information about your local radio systems so you can customize the programming to better suit your listening preferences.
Notes:
•You might hear transmissions on frequencies assigned to very distant stations. This will happen if a local system also uses the same frequency. Disregard the text tag for these transmissions (e.g. if you are in California, you aren’t really receiving Florida transmissions even if the scanner displays
Dade County).
•To free up memory, you can delete systems that you will not be monitoring. Refer to “Deleting Systems” on Page 58.
•Data used for the preprogrammed information was supplied courtesy of http://www.radioreference.com , the Internet’s premier scanning resource (RadioReference is not affiliated with Uniden America Corporation).
Preprogrammed Systems
96