Uniden SC230 owner manual Screening Out Paging Systems, Finding Repeater Output Frequencies

Page 76

Note: This feature does not operate when the scanner is in AM modulation mode.

Screening Out Paging Systems

			Srch/CloCall Opt	E
	Menu
Pager Screen			E

This setting determines whether the scanner automatically ignores transmissions found during searching or Close Call operation that are on common paging system frequencies.

On The scanner skips known paging system frequencies.

Off The scanner stops on any detected transmission, including paging systems.

Notes:

•The default setting for this feature is On.

•The frequencies include paging systems and also the NOAA weather frequencies.

•Even with the feature on, you might hear some paging systems. Some frequencies are shared between business radio systems and paging systems. If the scanner stops on a paging system even with this feature turned on, manually lock it out by pressing L/O.

Finding Repeater Output Frequencies

			Srch/CloCall Opt	E
	Menu
Repeater Find			E

This feature sets whether the scanner tries to tune to a repeater output frequency during Close Call operation when it detects a transmission on a repeater input frequency. Since you can normally only hear one side of a conversation when you listen to an input frequency transmission, turning this feature on can let you hear both sides of the conversation.

Search and Close Call Options

76

Image 76

Contents OWNER’S Manual Precautions PrecautionsPrecautions Contents Using the Menu Programming Radio Systems Contents Scanning Legally FCC Wants You to KnowFCC Wants You to Know FCC Wants You to Know Introduction IntroductionNFM UHF Feature Highlights Feature HighlightsFeature Highlights Weather Backlight and Power About This ManualHow the Scanner’s Controls Are Represented in This Manual Entering TextWhat is Scanning? What is Searching?Understanding Scanning Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz DCS Codes OctalUsing the Scanner at the Racetrack Conventional ScanningSimplex Operation Where To Get More InformationRepeater Operation Information On The Internet Included With Your Scanner Included With Your ScannerUsing Internal Batteries Setting Up Your ScannerSetting Up Your Scanner Setting Up Your Scanner Using Rechargeable Batteries Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Extension Speaker Connecting an Earphone/HeadphoneAttaching the Belt Clip Installing the Demo Software Attaching the Wrist StrapHold Look At The KeypadScan/Srch + 1-9, 0/Race Selects 0/RacePri No/ /Rev RclYes/Att Look At The Display Using Func Using MenuUsing the Scroll Control Turning On the Scanner Setting the Squelch Basic OperationScanning Systems Basic OperationScanning Preprogrammed Races When You Get To The TrackBefore You Get To The Track Selecting Systems to Scan Selecting Interference Eliminator CodesLocking/Unlocking Systems Selecting System Channel GroupsLocking/Unlocking Channels Holding On a Channel Temporarily Holding On a SystemQuick-Storing Channels Quickly Recalling Channels Other Settings Using the Backlight Initializing the Scanner’s MemoryConnecting Your Scanner to a Personal Computer Using the PC Control Cloning OptionsXfer Information Cloning the Scanner Using the Menu Using the MenuMenu Item Lets You See Set up Priority Scan Programming Radio Systems Programming Radio SystemsQuickly Programming Racing Systems Programming Radio Systems Manually Programming Racing Systems Editing the CarProgram SysteM Racing Confirm?Entering/Editing a Car Number Editing a DriverEditing a Car’s Channel Setting a Car’s Quick KeyDeleting a Car Setting Lockout On a Car Programming Conventional SystemsEntering/Editing Conventional Channel Groups Entering/Editing Conventional ChannelsProgramming Radio Systems System-Level Settings Programming/Editing Optional SettingsEditing the System Name Editing the System Quick Key Conventional Systems OnlySetting System Lockout Setting the System Hold TimeSetting the Channel Delay Time Setting Data SkipGroup-Level Settings Deleting SystemsCopying Systems Entering/Editing the Group NameSetting the Group Quick Key Channel-Level Settings Setting Group LockoutDeleting Groups Editing the Channel Name Conventional Systems OnlySetting Channel Priority Setting Channel Alert Setting CTCSS/DCSSetting Channel Modulation Setting Channel Attenuation Setting the Frequency StepSetting Channel Lockout Deleting ChannelsCopying/Pasting Channels Searching and Storing Service SearchSearching and Storing CTCSS/DCS Search Quick SearchCustom Search Editing a Custom Search Range Auto Search and Store Selecting a SystemStoring a System Using the Close Call Feature Using the Close Call FeatureSetting Close Call Options Close Call Hits Search and Close Call Options Managing Locked-Out FrequenciesSearching for Subaudible Tones Unlocking All FrequenciesScreening Out Paging Systems Finding Repeater Output FrequenciesSetting the Maximum Auto Store Value Setting the Modulation TypeSetting Data Skip Setting AttenuationSetting the Delay Time Setting the Search Frequency Step Using Weather Alert Same Using Weather Alert SameSearching For a Weather Broadcast Turning Weather Alert On/OffProgramming a Same Group Setting WX Alert Priority WX OperationCare and Maintenance CleaningCare and Maintenance General UseRepairs BirdiesTroubleshooting TroubleshootingProblem Possible Cause Suggestion Troubleshooting Specifications SpecificationsOperating Temperature Optional Accessories Optional AccessoriesCollecting Information PlanningPlanning Planning Race Name Filling Out The Racing System WorksheetCar #/Driver-Frequency-Priority-CTCSS/DCS Racing System Worksheet Racing System W orksheetFilling Out The Conventional System Worksheet System Name and Quick KeyGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System Worksheet Conventional System WorksheetPreprogrammed Systems Preprogrammed SystemsOne-Year Limited Warranty One-Year Limited WarrantyCorporation Uniden One-Year Limited Warranty Register Online Today