Uniden SC230 owner manual Setting System Lockout, Setting the System Hold Time

Page 56

After selecting this option, press 1-9to assign the system to a quick key or press No to assign the system to no quick key, then press E.

Hints:

•You can assign as many systems to the same quick key as you want.

•Preprogrammed conventional systems are set to quick key 9.

•To be scanned, a system’s quick key must be activated and the system must be unlocked.

Setting System Lockout

Menu

program system

E

Select the system		E
Edit Sys Option		E
Set Lockout	E

This setting controls whether the system is scanned when its quick key is enabled. Rotate the scroll control to select your setting, then press E.

Locked - the system is not scanned Unlocked - the system is scanned

Note: You can also lock or unlock a system by pressing Func , selecting the system, then pressing Func + L/O.

Setting the System Hold Time

Menu

program system

E

Select the system			E
Edit	Sys	Option	E
Set	Hold	Time	E

This setting controls how many seconds the scanner scans a system before moving to the next unlocked system. Enter a value from 0-255, then press E to save the setting.

Programming/Editing Optional Settings

56

Image 56

Contents OWNER’S Manual Precautions PrecautionsPrecautions Contents Using the Menu Programming Radio Systems Contents FCC Wants You to Know FCC Wants You to KnowScanning Legally FCC Wants You to Know Introduction IntroductionNFM UHF Feature Highlights Feature HighlightsFeature Highlights Weather Backlight and Power About This ManualHow the Scanner’s Controls Are Represented in This Manual Entering TextWhat is Scanning? What is Searching?Understanding Scanning Understanding the Scanner’s MemoryWhat is CTCSS/DCS? Ctcss Frequencies Hz DCS Codes OctalUsing the Scanner at the Racetrack Conventional ScanningRepeater Operation Where To Get More InformationSimplex Operation Information On The Internet Included With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Setting Up Your Scanner Using Rechargeable Batteries Connecting an Optional Antenna Using AC PowerConnecting the Antenna Attaching the Belt Clip Connecting an Earphone/HeadphoneConnecting an Extension Speaker Installing the Demo Software Attaching the Wrist StrapScan/Srch Look At The KeypadHold Pri 0/Race+ 1-9, 0/Race Selects Yes/Att RclNo/ /Rev Look At The Display Using the Scroll Control Using MenuUsing Func Turning On the Scanner Setting the Squelch Basic OperationScanning Systems Basic OperationBefore You Get To The Track When You Get To The TrackScanning Preprogrammed Races Selecting Systems to Scan Selecting Interference Eliminator CodesLocking/Unlocking Channels Selecting System Channel GroupsLocking/Unlocking Systems Quick-Storing Channels Temporarily Holding On a SystemHolding On a Channel Quickly Recalling Channels Other Settings Using the Backlight Initializing the Scanner’s MemoryXfer Information Using the PC Control Cloning OptionsConnecting Your Scanner to a Personal Computer Cloning the Scanner Menu Item Lets You See Using the MenuUsing the Menu Set up Priority Scan Programming Radio Systems Programming Radio SystemsQuickly Programming Racing Systems Programming Radio Systems Manually Programming Racing Systems Editing the CarProgram SysteM Racing Confirm?Entering/Editing a Car Number Editing a DriverDeleting a Car Setting a Car’s Quick KeyEditing a Car’s Channel Setting Lockout On a Car Programming Conventional SystemsEntering/Editing Conventional Channel Groups Entering/Editing Conventional ChannelsProgramming Radio Systems System-Level Settings Programming/Editing Optional SettingsEditing the System Name Editing the System Quick Key Conventional Systems OnlySetting System Lockout Setting the System Hold TimeSetting the Channel Delay Time Setting Data SkipGroup-Level Settings Deleting SystemsCopying Systems Entering/Editing the Group NameSetting the Group Quick Key Channel-Level Settings Setting Group LockoutDeleting Groups Editing the Channel Name Conventional Systems OnlySetting Channel Priority Setting Channel Alert Setting CTCSS/DCSSetting Channel Modulation Setting Channel Attenuation Setting the Frequency StepSetting Channel Lockout Deleting ChannelsCopying/Pasting Channels Searching and Storing Service SearchSearching and Storing Custom Search Quick SearchCTCSS/DCS Search Editing a Custom Search Range Auto Search and Store Selecting a SystemStoring a System Using the Close Call Feature Using the Close Call FeatureSetting Close Call Options Close Call Hits Search and Close Call Options Managing Locked-Out FrequenciesSearching for Subaudible Tones Unlocking All FrequenciesScreening Out Paging Systems Finding Repeater Output FrequenciesSetting the Maximum Auto Store Value Setting the Modulation TypeSetting the Delay Time Setting AttenuationSetting Data Skip Setting the Search Frequency Step Using Weather Alert Same Using Weather Alert SameSearching For a Weather Broadcast Turning Weather Alert On/OffProgramming a Same Group Setting WX Alert Priority WX OperationCare and Maintenance CleaningCare and Maintenance General UseRepairs BirdiesProblem Possible Cause Suggestion TroubleshootingTroubleshooting Troubleshooting Specifications SpecificationsOperating Temperature Optional Accessories Optional AccessoriesPlanning PlanningCollecting Information Planning Car #/Driver-Frequency-Priority-CTCSS/DCS Filling Out The Racing System WorksheetRace Name Racing System Worksheet Racing System W orksheetFilling Out The Conventional System Worksheet System Name and Quick KeyGroup Name and Quick Key Frequency-Alpha Tag-Priority-CTCSS/DCSConventional System Worksheet Conventional System WorksheetPreprogrammed Systems Preprogrammed SystemsCorporation Uniden One-Year Limited WarrantyOne-Year Limited Warranty One-Year Limited Warranty Register Online Today