Quickly Programming Racing Systems
You can use the menu system to program a racing system (see “Manually Programming Racing Systems” on Page 49). Or you can follow the onscreen prompts as described in this section to quickly program your scanner. These prompts are designed to help you quickly enter a new race from a frequency list purchased at the track (if the system is not already preprogrammed into your scanner). When you complete Steps 5 and 6, almost all cars will use the default settings for the other steps.
1.While scanning, press 0. Then rotate the scroll control to select New Race, then press E.
2.Enter the name of the race, then press E.
Select Race New Race
Name the Race
_
SYS
GRP
3.Enter the first car number (up to 3 digits), then press E.
4.Enter the first driver name (up to 12 characters), then press E.
5.Enter the driver’s frequency, then press E.
6.Set the CTCSS/DCS code, then press E
7.Set the modulation type (Auto is almost always the correct choice), then press E
Enter Car No
_
SYS
GRP
Enter Driver
_
SYS
GRP
Enter Frequency
_
SYS
GRP
Set CTCSS/DCS Off
Set Modulation Auto
Programming Radio Systems
47