Uniden UBC92XLT manual Scanning the Stored Channels

Page 29

UB324 Paper OM reduced size.fm Page 29 Wednesday, February 2, 2005 8:01 PM

press Func + or Func + to step through the frequencies.

To release the hold and continue searching, press Hold. Or, if you did not press Hold, simply press Func + or Func + to continue searching.

Storing Frequencies into Channels During Service Search

You can store frequencies you found during service search or service search hold mode into channels.

1.Press Func and Pgm during service search or service search hold mode. The frequency and the lowest blank channel alternately appear.

2.Press E/Pgm to store the frequency into the blank channel. If you want to select another channel, press Func + or Func + before you press E/Pgm. You can also use the 0-9 key to select the bank.

If you entered a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press /Clr then enter the correct frequency. To enter the frequency anyway, press E to accept.

Scanning the Stored Channels

To begin scanning channels, press Scan.

The scanner scans through all non-locked channels in the activated banks. (See “Locking Out Channels” on Page 39 and “Turning Channel-Storage Banks On and Off” on Page 38). When the scanner finds a transmission, it stops on it. When the transmission ends, the scanner resumes scanning.

Operation

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents
UB324hyou1.eps A N N E RPrecautions PrecautionsUBC92XLT Controls and Display UBC92XLT Controls and DisplayContents Contents Introduction IntroductionBand Plan Mode Step Feature Highlights Feature HighlightsAbout This Manual What is Searching? What is Scanning?Understanding Scanning Conventional ScanningRepeater Operation Simplex OperationInformation On The Internet Where To Obtain More InformationIncluded With Your Scanner Included With Your ScannerUsing Internal Batteries Setting Up Your ScannerUsing Rechargeable Batteries Setting Up Your ScannerUsing Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Optional Antenna Connecting an Earphone/HeadphoneConnecting an Extension Speaker Attaching the Belt Clip About Your Scanner About Your ScannerLook At The Keypad Func + Step Look At The Display Channel-Storage Banks Service BanksUnderstanding Banks Operation Turning On The Scanner Setting SquelchStoring Known Frequencies Into Channels OperationSearching For and Temporarily Storing Active Frequencies Service SearchScanning the Stored Channels Storing Frequencies into Channels During Service SearchManually Selecting a Channel Chain Search Special FeaturesSpecial Features Chain Search Mode Setting the Search Range Chain Search Hold ModeDirect Entry Search Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out ChannelsUsing the Display Backlight Using KeylockTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner Cleaning Care and MaintenanceCare and Maintenance General UseBirdies RepairsSpecifications Specifications21.3 MHz Optional Accessories Optional AccessoriesDeclaration of Conformity Declaration of ConformityMemo Memo UBZZ01324BZ
Top Page Image Contents