![](/images/new-backgrounds/1119247/11924781x1.webp)
UB324 Paper OM reduced size.fm Page 41 Wednesday, February 2, 2005 8:01 PM
Troubleshooting
If your UBC92XLT is not performing properly, try the following steps.
Problem | Possible Cause | Suggestion |
The | The scanner | Check the batteries |
scanner | might not be | or make sure the |
doesn’t | receiving any | AC adapter is |
work. | power. | connected to an AC |
|
| outlet and the |
|
| scanner. |
|
| If there is a wall |
|
| switch that controls |
|
| power to the AC |
|
| outlet where you |
|
| connected the AC |
|
| adapter, make sure |
|
| it is on. |
Improper | The scanner’s | Check the antenna |
reception. | antenna might | connection or move |
| need to be | or reposition the |
| adjusted. | antenna. |
|
| Move the scanner. |
|
| You might be in a |
|
| remote area that |
|
| could require an |
|
| optional |
|
| antenna. Check |
|
| with your dealer or |
|
| local electronics |
|
| store. |
Scan | The squelch | Adjust the squelch |
won’t | might need to | threshold. See |
stop. | be adjusted. | “Turning On The |
|
| Scanner and |
|
| Setting Squelch” on |
|
| Page 27. |
|
| Troubleshooting |
41