![](/images/new-backgrounds/1119247/11924755x1.webp)
UB324 Paper OM reduced size.fm Page 28 Wednesday, February 2, 2005 8:01 PM
2 seconds after the end of a transmission before scanning proceeds to the next channel. To turn the function off or on, press Func + Dly.
•If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press /Clr then enter the correct frequency. To enter the frequency anyway, press E to accept.
4.To program the next channel in sequence, press E/Pgm then repeat Steps 2 and 3.
Searching For and Temporarily Storing Active Frequencies
If you do not have a reference to frequencies in your area, use a search to find a transmission.
Note: When the scanner starts searching, it auto- matically turns on the delay function. To turn delay on or off, press Func + Dly.
Service Search
You can search for aircraft and FM CB transmis- sions without knowing the specific frequencies used in your area. The scanner is preprogrammed with all the frequencies allocated to these services. To use this feature, press Func + Svc. SRCH appears and the scanner searches starting with the aircraft service bank. To select a different service bank, repeatedly press Func + Svc. Service mode appears on the display.
When the scanner stops on a transmission, press Hold to stop searching and listen to the transmission. Hold appears. In this mode, you can
Operation
28