![](/images/new-backgrounds/1119247/11924771x1.webp)
UB324 Paper OM reduced size.fm Page 36 Wednesday, February 2, 2005 8:01 PM
and lowest blank channel alternate on the display.
2.Press E/Pgm to store the frequency into the blank channel. To select another channel, repeatedly press Func + or Func +
to select the blank channel you want, then press E. You can also use the
If you enter a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press /Clr. To enter the frequency anyway, press E/Pgm to accept.
The scanner moves to program mode after you stored the frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a search. This lets you avoid unwanted frequencies or those already stored in a channel.
Note: Search skip frequencies are shared by service search, direct entry search, chain search. If skip frequencies are sent in certain mode, the frequencies are also skipped in other search modes.
To skip a frequency, press Func and L/O when the scanner stops on the frequency during a search or a search hold. The scanner stores the frequency in memory and automatically resumes the search if it is not in hold.
Follow these steps to clear a single frequency from skip memory so the scanner stops on it during a search.
1. Press Hold to stop the search.
Special Features
36