Uniden UBC92XLT manual Resetting the Scanner

Page 43

UB324 Paper OM reduced size.fm Page 43 Wednesday, February 2, 2005 8:01 PM

Resetting the Scanner

If the scanner's display locks up or stops operating properly, you might need to reset the scanner.

Caution: This procedure clears all the information (except the band plan data) you have stored in the scanner. Before you reset the scanner, try turning it off and on to see if it begins working properly. Reset the scanner only when you are sure it is not working properly.

1.Turn off the scanner.

2.While holding down 2, 9, and Hold, turn on the scanner. It takes about 3 seconds to initialize and CLEAr appears.

Troubleshooting

43

Image 43

Contents

UB324hyou1.eps A N N E RPrecautions PrecautionsUBC92XLT Controls and Display UBC92XLT Controls and DisplayContents Contents Introduction IntroductionBand Plan Mode Step Feature Highlights Feature HighlightsAbout This Manual Conventional Scanning What is Scanning?What is Searching? Understanding ScanningRepeater Operation Simplex OperationInformation On The Internet Where To Obtain More InformationIncluded With Your Scanner Included With Your ScannerSetting Up Your Scanner Setting Up Your ScannerUsing Internal Batteries Using Rechargeable BatteriesUsing Non-rechargeable Batteries Setting Up Your Scanner Connecting the Antenna Using AC PowerConnecting an Extension Speaker Connecting an Earphone/HeadphoneConnecting an Optional Antenna Attaching the Belt Clip About Your Scanner About Your ScannerLook At The Keypad Func + Step Look At The Display Understanding Banks Service BanksChannel-Storage Banks Operation Turning On The Scanner Setting SquelchOperation Storing Known Frequencies Into ChannelsSearching For and Temporarily Storing Active Frequencies Service SearchScanning the Stored Channels Storing Frequencies into Channels During Service SearchManually Selecting a Channel Special Features Special FeaturesChain Search Chain Search Mode Setting the Search Range Chain Search Hold ModeDirect Entry Search Direct Entry Search Hold Mode Search Skip Memory Delay Turning Channel-Storage Banks On and Off Priority Locking Out ChannelsUsing the Display Backlight Using KeylockTroubleshooting TroubleshootingTroubleshooting Resetting the Scanner General Use Care and MaintenanceCleaning Care and MaintenanceBirdies RepairsSpecifications Specifications21.3 MHz Optional Accessories Optional AccessoriesDeclaration of Conformity Declaration of ConformityMemo Memo UBZZ01324BZ