▲Uniden Data 2000 Wireless CDPD PC Card
2.4.5 Setting Up Dial-Up Networking for PPP
To setup
1.
2.Open the Dial-Up Networking folder.
Verify that a file PC Card PPP was created. (It should be generated during Host Application Installation). If the file is not found, continue with the following procedures.
3.
4.When you are instructed to select a modem, click on Uniden Data 2000 PC Card. Change the name of the connection from My Connection to PC Card PPP, then click Next.
5.Enter the single digit: 0 in the Telephone Number box. Deselect Use Country code and area code.
6.Right click on PC Card PPP to activate the Pccard screen. Select Properties.
Uniden Data 2000 Installation and Operation Manual |