Uniden Data 2000 Wireless CDPD PC Card manual At Encr?

▲Uniden Data 2000 Wireless CDPD PC Card

AT Command Syntax	Description of Command
AT ENCR?	Read Data Encryption Mode from a
[CAT][MDT][UDT][SPDT]	particular default table.
	(If the option is not specified, the CAT will
	be used as the default table.)
	Response: Encryption Flag 0 or
	Encryption Flag 1
	Encryption Flag 0 means encryption is off,
	Encryption Flag 1 means is on.
AT FC?	Read flow control mode from the
	System Table.
	Response: Flow control mode 0,
	Flow control mode 1
	Flow control mode 0 means flow control is
	off, Flow control mode 1 means flow
	control is on.
AT HWVER? or ATI0	Read the hardware version of the Modem
	from the System Table.
	Response: U D 1000 n.n
AT IP?	Read the active NEI number from a
[CAT][UDT][MDT][SPDT]	particular default table.
	(If the option is not specified the CAT will
	be used as the default table.)
	Response: Active IP n (n = from 1 to 10)
AT NEIn?	Read NEI n (n = from 1 to 10) from the
	System Table
	Response: NEIn ddd.ddd.ddd.ddd
AT PREFER?	Read the side preference from a particular
[CAT][UDT][MDT][SPDT]	default table. Side A includes channels
	1-333, 667-716, and 991-1023.
	Side B includes channels 334-666
	and 717-799.
	(If the option is not specified the CAT will
	be used as the default table.)
	Response: Side Preference n

Uniden Data 2000 Installation and Operation Manual D-7