Uniden Data 2000 Wireless CDPD PC Card manual At Verbose?, Response OK

▲Uniden Data 2000 Wireless CDPD PC Card

AT Command Syntax	Description of Command
AT SWVER? or ATI1	Read the software code version
	downloaded in the Modem from the
	System Table.
	Data encrypted version: U-D_1000
	(Version #) (Date Time)
	Non encrypted version: No Encrypt
	Version #)(Date Time)
	Response: U-D_1000 (Version #)
	(Date Time)
	No Encrypt (Version #) (Date Time)
AT VERBOSE?	Read 1 for verbose or 0 for terse modes
	from the System Table.
	Response: Verbose 0 or Verbose 1
	Verbose 0 means terse mode is on,
	Verbose 1 means verbose mode is on.
AT CLRAUTH NEI n	Clear Authentication parameters for NEI #n.
	WARNING: Check with your service
	provider before taking this step.
	Response: OK
AT CMPR <1><0>	Set TCP/IP Header Compression Mode.
	(On/Off)
	Response: OK
AT FC <1><0>	Set flow control mode (On/Off).
	(When hardware flow control is enabled,
	the Modem generates CTS when it is able to
	accept characters, otherwise it will de-assert
	CTS. The Modem inhibits output to the
	serial line when the host de-asserts RTS;
	otherwise it will permit output.)
	Response: OK

Uniden Data 2000 Installation and Operation Manual D-9