Uniden ENR1504 manual

Page 52

NIC (Network Interface Card) – A board installed in a computer system, usually a PC, to provide network communication capabilities to and from that computer system. Also called an adapter.

NTP (Network Time Protocol) - is a protocol used to synchronize computer clock times in a network of computers.

Packet Filtering - Discarding unwanted network traffic based on its originating address or range of addresses or its type (e-mail, file transfer, etc.).

PCI (Peripheral Component Interconnect) – A peripheral bus commonly used in PCs, Macintoshes and workstations. It was designed primarily by Intel and first appeared on PCs in late 1993. PCI provides a high-speed data path between the CPU and peripheral devices (video, disk, network, etc.). There are typically three of four PCI slots on the motherboard. In a Pentium PC, there is generally a mix of PCI and ISA slots or PCI and EISA slots. Early on, the PCI bus was known as a “local bus.” PCI allows IRQs to be shared, which helps to solve the problem of limited IRQs available on a PC. For example, if there were only one IRQ left over after ISA devices were given their required IRQs, all PCI devices could share it. In a PCI-only machine, there cannot be insufficient IRQs, as all can be shared.

PCMCIA - The PCMCIA (Personal Computer Memory Card International Association) is an industry group organized in 1989 to promote standards for a credit card-size memory or I/O device that would fit into a personal computer, usually a notebook or laptop computer.

Peer-to-Peer Networking – Allows users to share local resources between PCs without needing an access point or router.

103

Ping (Packet Internet Groper) – An Internet utility used to determine whether a particular IP address is online. It is used to test and debug a network by sending out a packet and waiting for a response.

Plug-and-Play– The ability of a computer system to configure expansion boards and other devices automatically without requiring the user to turn off the system during installation.

Port – A pathway into and out of the computer of a network device such as a switch or router. For example, the serial and parallel ports on a personal computer are external sockets for plugging in communications lines, modems, and printers.

PPPoE (Point to Point Protocol over Ethernet) – A method used mostly by DSL providers for connecting personal computers to a broadband modem for Internet access. It is similar to how a dial-up connection works but at higher

PPTP (Point-to-Point Tunneling Protocol) – A protocol (set of communication rules) that allows corporations to extend their own corporate network through private “tunnels” over the public Internet. Effectively, a corporation uses a wide-area network as a single large local area network. A company no longer needs to lease its own lines for wide-area communication but can securely use the public networks. This kind of interconnection is known as a virtual private network (VPN).

Print Server - A hardware device that enables a printer to be located anywhere in the network.

RIP (Routing Information Protocol) – A simple routing protocol that is part of the TCP/IP protocol suite. It determines a route based on the smallest hop count between source and destination. RIP is a distance vector protocol that routinely broadcasts routing information to its neighboring routers and is

104

Image 52
Contents Table of Contents System Information Screen Rebooting the Router Power LED does not Turn onImportant Safety Instruction Updating the FirmwareWelcome Packet Filtering, Add ScreenENR1504 Features Internet Access FeaturesLAN Features ROUTER/SECURITY FeaturesParental Control Features Advanced Router FeaturesPackage Contents Front View DetailsHardware Installation Quick Installation ProcessRear View Details PC Configuration Installing the HardwareFor Windows 95, 98, and ME For WindowsFor Windows NT For Windows XPBasic Router Configuration LoggingChanging the Default Password UnidenConfiguring the Time Account Configuration ScreenSetting Parental Controls NETWORK-LEVEL ControlPC Access Rules Screen PC-LEVEL ControlConfiguring Restriction Rules Restrict Rules ScreenConfiguring AN Override Password Or some other safe locationConfiguring Basic ISP Connections WAN Configuration, Dynamic IP ScreenAdvanced Router Configuration Configuring for a Static IP Address WAN Configuration, Static IP ScreenConfiguring for Pppoe Support WAN Configuration, PPPoE ScreenEnabling MAC Address Spoofing MAC Spoofing ScreenConfiguring a Fixed IP Address for a PC Reserving Fixed IP AddressesExcluding Fixed IP Addresses DHCP, Fixed IP Table ScreenConfiguring a PC AS a Host Port Mapping DHCP, Excluded IP Table ScreenPort Mapping Screen Twice with the different port ranges see on Configuring Universal Plug and Play UPnP Configuring a DMZChanging the Dhcp Configuration Changing the Dhcp Server SettingsDisabling the Dhcp Server LAN Configuration Screen Enabling Dynamic DNS Dynamic DNS ScreenEditing the Routing Table Routing Table ScreenConfiguring Packet Filtering Routing Table, Add ScreenPacket Filtering Screen Page Router Maintenance Features System Information ScreenHARDWARE, SOFTWARE, and Bootcode Version System UP TimeCurrent Time System Time LAN StatusRebooting the Router Resetting the Router to Factory DefaultsSoftware Reboot Hardware RebootSystem Logs Restoring Factory Defaults with the HardwareAutomatically Emailing System Logs Reading System Logs This screen displays the following informationTroubleshooting Power LED does not Turn onUpdating the Firmware Test LED Stays onSingle PC Cannot Connect to the Router Or the Internet No PCS can Connect to the InternetSpecifications Legal Notice IC NoticeFCC Information FCC Wants YOU to KnowImportant Safety Instruction PrecautionsImportant Electrical Considerations One Year Limited Warranty Warrantor Uniden America Corporation UnidenGlossary Page Page Page Page Page Page Memo