Uniden UBCT8 owner manual Adjust the squelch for Trunking mode refer to

Page 58

If you experience difficulty while in TrunkTracker mode, try the following steps.

Problem		Suggestion
Scanner won't track.	1.	Missing the Data Frequency.
	2.	Change to a Type 1 Scanner setup.
		Review Fleet Map Programming on page 44.

Scanner won't stop	1.	No IDs have been programmed.
during Scan List mode.	2.	The IDs you have stored are not active.

Scanner will not acquire	1. Adjust the squelch for Trunking mode - refer to page 29.
data channel.	2.	Missing the frequency used for the data channel.
		Check your frequency list.

Missing replies to	1.	Change a Type 1 scanner setup.
conversations.	2.	Review Fleet Map Programming on page 44.
	2.	Try another Preset Fleet Map or Program your own Fleet
	3.	Map.
	3.	Check to see that all of the system's frequencies have
		been entered.

Channel Activity	1.	May be a telephone interconnect call, which are
Indicators are flashing	2.	intentionally blocked by your scanner.
but no sound is heard.	2.	The ID on your display is not active.

	1.	Logical channel numbers (frequencies) for the system are
Scanner not tracking an		not programmed in the correct order. Check frequency
EDACS system	2.	resources and reprogram.
properly.	2.	Not all frequencies for the system are programmed.
		Check frequency resources.

If you still cannot get satisfactory results while using your scanner or if you want additional information, please see the Uniden contact details in the warranty page at the back of this manual.

If you have internet access, you can visit www.uniden.com.au, www.uniden.co.nz for additional information.

Image 58

Contents UBCT8 Scanner Precautions Contents Edacs Scat Range Mhz Mode Step IntroductionFront and Rear Views ProgIcon Display 3 4What is Trunk Tracking? What is Scanning?What is Searching? TerminologyPage Feature Highlights Optional Accessories Included with Your Scanner PackageFor Home Use Desktop Installation Installing the UBCT8For Mobile Use In-Car Installation Connecting the Power Cord Installation for everyday use Typical Mounting Methods Mounting the Scanner in Your VehicleApplying Power for Vehicle Installation DC power InstallationConnecting the Clone Cable Applying Power Using Standard AC PowerConnecting an External Speaker Listening SafelyTurn the Scanner On Scanning OverviewYou can scan in one of five ways Setting the Squelch How Squelch WorksSelecting the State State ScanningPress Police Storing State Scan Frequencies State Scan HoldSkip a frequency Set Close Call Mode Close CallTM RF CaptureClose Call Operation Set Close Call Option Select Close Call BandsAlert Light Adjustment Setting of pager screenAlert Tone Volume Set Close Call AlertProgramming Frequencies into Channels Private Bank ScanningDeleting a Stored Frequency Memory Lock Duplicate Frequency AlertScanning Private Bank Hold/Resume Restoring a Locked-out Channel in Hold ModeChannel Lockout Changing the Priority Channel Restoring All Locked-out ChannelsPriority Scan Then press HOLD/RESUMEService Scanning UCB, AM CB ACBBand No Range Mhz Mode Step Display Band SearchData Skip Search Hold FeatureFrequency Skip Delay Storing Search FrequenciesSetting the Squelch Trunk TrackingProgramming Trunking Frequencies Selecting Trunking System TypeProgramming Trunking Frequencies Programming Talk Group ID/Scan ListsTo enter a Full Edacs ID To enter a Type 2 Talk Group IDTo enter a Type 1 ID To enter a Partial Edacs IDID Scan Mode Receiving Trunked SystemsID Search Mode ID Scan Hold FeatureTo directly access a specific ID location Programming Scan Lists During Search ID Monitor ModeID Search Hold and Direct Entry ID in Hold Mode Deleting a Stored IDID Lockout To restore a single ID, follow these stepsID is restored and L/O disappears Review ID LockoutTrunking Frequency Confirmation Setting the Delay Mode for Trunking ModeSetting Priority in Trunking Mode Moving between Scan List MemoriesMulti-Track Multi-Track Operational DetailsEdacs Tracking Edacs ReceptionProgramming Edacs System Frequencies An Edacs Trunked system Special Edacs Features Edacs ID Range SearchLTR Reception LTR TrackingMotorola Reception Motorola TrackingFleet Map Programming Selecting Preset Fleet MapProgramming a User Fleet Map Programming a Hybrid System Control Channel Only Mode Toggling the Status BitDisconnect Tone Detect Option End Code PC Control Mode Remote InterfaceStart Remote Mode and Change Transfer Speed Clone ModePC Control Parameter To connect the Scanner to Scanner Page Care and Maintenance General UseTroubleshooting Problem SuggestionAdjust the squelch for Trunking mode refer to Specifications Appendix Preset Fleet Maps Page User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code Restrictions Memo Memo Parts Covered Thankyou for Buying a Uniden Product