Uniden UBCT8 owner manual Specifications

Page 59

Specifications

Certified in accordance with FCC Rules and Regulations Part 15, Subpart C, as of date

of manufacture.

 

Channel:

250

Banks:

5 (50 channels each)

Service Bands:

6 preprogrammed search bands

Frequency Range:

25.0-28.0 MHz

 

28.0-70.0 MHz

 

70.0-88.0 MHz

 

88.0-108.0 MHz

 

108.0-137.0 MHz

 

137.0-148.0 MHz

 

148.0-174.0 MHz

 

174.0-225.0 MHz

 

225.0-400.0 MHz

 

400.0-512.0 MHz

 

806.0-956.0 MHz

 

1240.0-1300.0 MHz

Operating Temperature: –20 °C to +60 °C (-4 °F to +140 °F)

Scan Rate:

100 channels per second (conventional mode)

Search Rate:

100 steps per second (Normal Search)

 

300 steps per second (Turbo Search: when searching 5KHz step

Audio Output:

bands)

Maximum 2.0W (1.6W normal @ 10% THD)

Internal Speaker:

8 ohms (57 mm outer diameter)

Power Requirements:

AAD-008S AC Adapter (12V DC, 500mA)

Antenna:

Telescopic Antenna (included)

Antenna Jack:

Window Mount Antenna (included)

BNC type

External Jacks:

External Speaker (EXT.SP.) (3.5 mm)

 

DC 12 V Power Jack, (center is positive)

Size:

Remote Control (REMOTE) Jack (DB-9)

7.06 in. (W) x 6.10 in. (D) x 2.44 in. (H)

Weight:

176.5mm (W) x 153.6 (D) x 50.8mm (H)

1.1 kg (2 lbs 7 oz.)

Features and specifications are all subject to change without notice.

Page 58 Page 60
Image 59
Page 58 Page 60
Contents UBCT8 Scanner Precautions Contents Edacs Scat Introduction Range Mhz Mode StepProg Front and Rear Views3 4 Icon DisplayTerminology What is Scanning?What is Searching? What is Trunk Tracking?Page Feature Highlights Included with Your Scanner Package Optional AccessoriesFor Mobile Use In-Car Installation Installing the UBCT8For Home Use Desktop Installation Connecting the Power Cord Installation for everyday use Mounting the Scanner in Your Vehicle Typical Mounting MethodsDC power Installation Applying Power for Vehicle InstallationListening Safely Applying Power Using Standard AC PowerConnecting an External Speaker Connecting the Clone CableYou can scan in one of five ways Scanning OverviewTurn the Scanner On How Squelch Works Setting the SquelchPress Police State ScanningSelecting the State Skip a frequency State Scan HoldStoring State Scan Frequencies Close CallTM RF Capture Set Close Call ModeClose Call Operation Select Close Call Bands Set Close Call OptionSet Close Call Alert Setting of pager screenAlert Tone Volume Alert Light AdjustmentDeleting a Stored Frequency Private Bank ScanningProgramming Frequencies into Channels Scanning Private Bank Duplicate Frequency AlertMemory Lock Channel Lockout Restoring a Locked-out Channel in Hold ModeHold/Resume Then press HOLD/RESUME Restoring All Locked-out ChannelsPriority Scan Changing the Priority ChannelUCB, AM CB ACB Service ScanningBand Search Band No Range Mhz Mode Step DisplayFrequency Skip Search Hold FeatureData Skip Storing Search Frequencies DelayTrunk Tracking Setting the SquelchSelecting Trunking System Type Programming Trunking FrequenciesProgramming Talk Group ID/Scan Lists Programming Trunking FrequenciesTo enter a Partial Edacs ID To enter a Type 2 Talk Group IDTo enter a Type 1 ID To enter a Full Edacs IDReceiving Trunked Systems ID Scan ModeTo directly access a specific ID location ID Scan Hold FeatureID Search Mode Deleting a Stored ID ID Monitor ModeID Search Hold and Direct Entry ID in Hold Mode Programming Scan Lists During SearchReview ID Lockout To restore a single ID, follow these stepsID is restored and L/O disappears ID LockoutMoving between Scan List Memories Setting the Delay Mode for Trunking ModeSetting Priority in Trunking Mode Trunking Frequency ConfirmationMulti-Track Operational Details Multi-TrackProgramming Edacs System Frequencies Edacs ReceptionEdacs Tracking An Edacs Trunked system Edacs ID Range Search Special Edacs FeaturesLTR Tracking LTR ReceptionMotorola Tracking Motorola ReceptionProgramming a User Fleet Map Selecting Preset Fleet MapFleet Map Programming Programming a Hybrid System Toggling the Status Bit Control Channel Only ModeDisconnect Tone Detect Option End Code Remote Interface PC Control ModePC Control Parameter Clone ModeStart Remote Mode and Change Transfer Speed To connect the Scanner to Scanner Page General Use Care and MaintenanceProblem Suggestion TroubleshootingAdjust the squelch for Trunking mode refer to Specifications Appendix Preset Fleet Maps Page Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Size Code Restrictions Memo Memo Parts Covered Thankyou for Buying a Uniden Product
Top Page Image Contents