Connecting Cables
There are three cables that you can connect to the BC- RH96.
●The DC power cable
●The Remote Control cable
●The Data Port cable (not supplied with
Remote Head and Scanner Power
To provide power to the Remote Head, insert the barrel of the cigarette lighter adapter into the jack in the back of the unit marked DC IN 13.8V. Insert the other end in a convenient socket on the dash of your vehicle.
To connect a power lead permanently, obtain a barrel connector 5.5 mm diameter, with a center pin 2 mm
diameter and wire it with the center positive using at least 18 gauge wire to an extra fuse block terminal of your vehicle.
The Remote Head cannot turn power to the scanner off or on. Therefore, consider connecting the power lead of the scanner to a terminal on your vehicle that is turned off when you turn off the ignition key.
Control Cable
The
11