Uniden BC-RH96 manual Using Hook and Loop Material

Page 9

5.Route the Remote Cable through the Slotted Guide

(3) so it lies flat. Route the Power Cord so it does not interfere with any other wires.

Using Hook and Loop Material

The rear of the unit, when all connectors and cables are properly routed, is flat. This permits using hook and loop material (not supplied) that has a heavy-duty peel and stick adhesive on one side. This material is generally available from electronic supply stores and hardware stores.

Do not apply the tape to the rear until all cables are installed and routed correctly.

Do not cover the slotted guide with the tape.

Follow the directions supplied with the hook and loop material. Locate a suitable spot on the dash, console, or other area. If you use the Remote Head in another place such as a radio room, using tape lets you quickly mount or remove the Head as desired.

Note: The two slots on the front of the Remote Head cannot be used for mounting. These slots are cosmetic features only.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Table of Contents Introduction FCC Statement IC Statement Included with your BC-RH96 Mounting the BC-RH96 Using the Mounting BracketBC-RH96 Using Hook and Loop Material BC-RH96 Connections Connecting Cables Remote Head and Scanner PowerControl Cable Data Port Cable Firmware Updates Control Configuration Guides BCD396T Key Configuration BR330T Key ConfigurationBCD996T Key Configuration BCT15 Key Configuration8GTUKQP  Operation2QYGTKPI FQYP  Setting the BC-RH96 BacklightSetting the BC-RH96 LCD Contrast Configuration Menu ModeMobile Default Key Assigment Setting Mobile OptionsF1, F2, F3 Key Function Default Handy Option Key Assigment Setting Handy OptionsSetting Hold Timer Setting the Function ModeSetting Auto Release Volume Settings For Handy ScannerMiscellaneous Control Limitations Serial Operation PrecautionsInitialize Memory Reset One Year Limited Warranty Specifications
Top Page Image Contents