Uniden BC-RH96 manual Setting the Function Mode, Setting Hold Timer

Page 22

Setting the Function Mode

If you scroll to the Handy Option menu, you can highlight Set Func Mode.

Select this to choose between Set Hold Timer and Set Auto Release.

Setting Hold Timer

When you select this option, you can scroll through and select from five settings. The setting determines how long the knob acting as the FUNC control is enabled each time you press it if you do nothing else.

The five settings are:

Off: Function mode is continuously enabled only while pressing the Control or SQ knob.

3 sec: Function mode is enabled for 3 seconds after releasing the Control or SQ knob.

5 sec: Function mode is enabled for 5 seconds after releasing the Control or SQ knob.

10 sec: Function mode is enabled for 10 seconds after releasing the Control or SQ knob.

Infinite: Function mode is enabled until the Control or SQ knob is pressed again (default).

22

Image 22

Contents Page Table of Contents Introduction FCC Statement IC Statement Included with your BC-RH96 Using the Mounting Bracket Mounting the BC-RH96BC-RH96 Using Hook and Loop Material BC-RH96 Connections Remote Head and Scanner Power Connecting CablesControl Cable Data Port Cable Firmware Updates Control Configuration Guides BR330T Key Configuration BCD396T Key ConfigurationBCT15 Key Configuration BCD996T Key ConfigurationOperation 8GTUKQP Setting the BC-RH96 Backlight 2QYGTKPI FQYP Configuration Menu Mode Setting the BC-RH96 LCD ContrastSetting Mobile Options Mobile Default Key AssigmentF1, F2, F3 Key Function Setting Handy Options Default Handy Option Key AssigmentSetting the Function Mode Setting Hold TimerVolume Settings For Handy Scanner Setting Auto ReleaseMiscellaneous Serial Operation Precautions Control LimitationsInitialize Memory Reset Specifications One Year Limited Warranty