Mounting the BC-RH96
The following two mounting methods are suggestions used by most. Depending upon your individual situation, you may decide on a different approach.
Using the Mounting Bracket
For most vehicles, the supplied bracket will be the easiest method of mounting.
With the bracket removed from the Remote Head, use the holes in the bracket as a template to initially mark the location you plan to use in your vehicle. Be abso- lutely certain of what might be behind the mounting surface before making any holes, be it above, or below,
or in front of your dash, armrest console, or other location. If you drill carelessly, expensive damage can result. If in doubt, consult your vehicle dealer’s service department or a qualified professional installer.
Important: AVOID AIRBAG DEPLOYMENT ZONES. Ignoring this installation concern may result in bodily harm and the inability of the airbag to per- form properly.
Be sure to select a mounting location so that when you route power and remote cables they do not interfere with any existing cables or other controls.
Check local laws to determine if using a scanner is legal in your area.