Uniden manual Setting the BC-RH96 Backlight, 2QYGTKPI FQYP 

Page 17

When you turn the Remote Head off, you see the screen to the right which reminds you that power is still applied to the target scanner.

2QYGTKPIFQYP

VJGTGOQVGJGCF FQGUPQVVWTP QHHVJG5ECPPGT

Brightness Auto-Adjust (mobile scanners only) When you connect a mobile scanner, the Remote Head automatically adjusts its backlight brightness level to match the brightness level of the target mobile scanner. If you change the brightness level on either the Remote Head or the target scanner, the level changes on

Setting the BC-RH96 Backlight

To adjust the backlight brightness level on the Remote Head, repeatedly press the VOL control. The display cycles through available backlight brightness levels, including off. Stop when you reach the desired level.

both devices at the same time. (This function is not available on Handy Scanners.)

Note: If the Remote Head is connected to a BCT- 15 scanner, press F + VOL control to change the backlight brightness level.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Table of Contents Introduction FCC Statement IC Statement Included with your BC-RH96 Mounting the BC-RH96 Using the Mounting BracketBC-RH96 Using Hook and Loop Material BC-RH96 Connections Control Cable Connecting CablesRemote Head and Scanner Power Data Port Cable Firmware Updates Control Configuration Guides BCD396T Key Configuration BR330T Key ConfigurationBCD996T Key Configuration BCT15 Key Configuration8GTUKQP  Operation2QYGTKPI FQYP  Setting the BC-RH96 BacklightSetting the BC-RH96 LCD Contrast Configuration Menu ModeMobile Default Key Assigment Setting Mobile OptionsF1, F2, F3 Key Function Default Handy Option Key Assigment Setting Handy OptionsSetting Hold Timer Setting the Function ModeMiscellaneous Setting Auto ReleaseVolume Settings For Handy Scanner Control Limitations Serial Operation PrecautionsInitialize Memory Reset One Year Limited Warranty Specifications
Top Page Image Contents